Weatherboards give a home its character, but they need the right care to stay protected from Melbourne's sun, wind and rain. Crown Finisher Painters provides weatherboard painting for period homes, California bungalows and modern weatherboard houses across Melbourne. Old paint is scraped, sanded and repaired, bare timber is primed, and quality exterior paint is applied so the finish looks great and lasts. Every job starts with a written, itemised quote.
A weatherboard house is only as good as the preparation under the paint. Get that right and the finish lasts for years.
Crown Finisher Painters TeamPainting a weatherboard house takes more work than most exteriors. Timber moves as it heats and cools, old paint builds up over decades, and the edges and joins of every board need attention. When weatherboards are painted without proper preparation, new paint starts peeling and cracking within a few years. Crown Finisher Painters takes the time to get the base right first.
That means washing the boards, scraping and sanding back loose and flaking paint, repairing cracked or rotten timber, filling gaps, and priming bare areas before two coats of quality exterior weatherboard paint go on. Window frames, eaves, fascias and trims are painted at the same time, and the work can be combined with full exterior painting or exterior timber painting on decks, pergolas and fences.
Every weatherboard painting quote is written and itemised, listing the preparation, products and number of coats.
The condition of your weatherboards decides how much preparation they need before painting. These are the most common problems on Melbourne weatherboard homes, and how each one is put right before the first coat goes on.
Paint feels powdery and leaves a white residue on your hand. The finish looks faded and flat.
How it's fixed: Washed thoroughly and sealed with a binding primer so the new paint grips properly.
Paint lifting at the edges or coming away in strips, often on the sunniest or wettest sides of the house.
How it's fixed: Loose paint scraped back, edges sanded smooth and bare timber primed before repainting.
Fine cracks running along or across the paint, letting moisture into the timber underneath.
How it's fixed: Cracked paint removed, gaps filled and the surface sanded so cracks don't show through the new coat.
Soft, spongy or crumbling boards, usually near the ground, around windows or under leaking gutters.
How it's fixed: Rotten sections cut out and replaced or repaired with timber filler before any painting begins.
Black or green spots on shaded walls, along the bottom boards and under eaves.
How it's fixed: Treated with a mould killing wash and rinsed off before priming and painting.
Many older Melbourne weatherboard homes have layers of old paint that may contain lead.
How it's fixed: Old paint tested before sanding, and lead safe methods used where lead is present.
Weatherboards need painters who understand timber. These are the standards behind every weatherboard job Crown Finisher takes on.
Washing, scraping and sanding weatherboards before any paint goes on.
Cracked, split or rotten boards repaired or replaced.
Bare and weathered timber sealed so paint bonds properly.
Older paint tested and handled safely where needed.
Flexible coatings made for timber and Melbourne weather.
Preparation, products and coats confirmed in writing first.
From a single weathered wall to a full weatherboard house repaint, here's the work the team typically covers.
The difference between a weatherboard finish that lasts a few years and one that lasts much longer comes down to what happens before painting.
See weatherboard homes painted by Crown Finisher across Melbourne, or compare the before and after.
From Victorian and Edwardian weatherboards in the inner north to bungalows and newer homes in the suburbs, Crown Finisher Painters provides weatherboard painting across greater Melbourne.
Real feedback from homeowners and businesses across Melbourne who trusted Crown Finisher Painters with their projects.
Homeowners usually ask the same questions before painting a weatherboard house. Here are clear answers.
The best way to paint weatherboards is to start with thorough preparation: wash the boards, scrape and sand back loose paint, repair damaged timber, fill gaps and prime bare areas. Then apply two coats of quality exterior acrylic paint, working along a few boards at a time from top to bottom to avoid lap marks.
The cost of repainting a weatherboard house depends on the size and height of the home, the condition of the existing paint, how much scraping, sanding and timber repair is needed, whether lead paint is present, trims and eaves, and any colour change. Crown Finisher provides a free, written and itemised quote after an inspection so you know the exact cost before work begins.
Only if the old paint is sound and well bonded. Chalky, peeling or cracked paint needs to be cleaned, scraped and sanded back first, otherwise the new coat will fail along with the old one underneath.
A premium 100% acrylic exterior paint made for timber is the best choice for weatherboards, because it stays flexible as the timber moves and resists cracking, peeling and fading. Bare or weathered timber should be primed first.
Popular weatherboard colours in Melbourne include soft whites, warm creams, greys, sage greens and deep charcoal, often paired with contrasting trims. Period homes often suit heritage colour schemes, while modern homes suit darker, more muted tones.
Old weatherboards should be washed, scraped back to remove loose paint, sanded to smooth the edges, repaired where timber is damaged, and primed where bare timber is exposed. Older homes should also be tested for lead paint before sanding.
Yes, in most cases. Sanding smooths the edges of scraped areas, removes chalky residue and gives the new paint a surface to grip, which helps it last longer.
Weatherboard homes in Melbourne usually need repainting every 7 to 10 years, depending on sun exposure, the quality of the previous paint job and how well the timber has been maintained.
Crown Finisher Painters provides weatherboard painting across Melbourne and its suburbs. If your area isn't on the service areas page, get in touch to confirm availability.
A weatherboard painting quote covers washing, scraping and sanding, timber repairs, priming, the exterior paint system, the number of coats, trims and eaves, and the timeframe, so scope and cost are clear before work begins.
Tell us about your weatherboard home and the team will get back to you with a free, no obligation painting quote.
Peeling, chalky or tired weatherboards? A quick call is the easiest way to arrange an inspection and talk through colours and preparation.
